Products

Stainless Steel powders

Steels containing more than approximately 10% Cr are defined as stainless materials. Depending on the amount of Cr and other alloying elements such as Ni and Mo, properties like mechanical strength and corrosion resistance are defined.

Höganäs' standard PM grades are all low-carbon versions and optimised for compaction and sintering/heat treatment. The grades can be categorised in three groups: austenitic, ferritic and ferritic/martensitic.

Compressibility differs between the austenitic and ferritic grades, but the biggest difference is workability for a fully dense material. Most shapes can be made with both powder types so only corrosion resistance needs to be taken under consideration.

Austenitic grades

Application examples are lock parts, small gears, cams and connectors.
304L

Ferritic and ferritic/martensitic grades

These materials have a very attractive cost/performance ratio but a somewhat lower corrosion resistance in some environments compared to the austenitic materials. Application examples are automotive exhaust flanges and hot exhaust gas oxygen (HEGO) sensor bosses.
409LE
434L

Stainless Steel EZ

304LEZ
316LEZ
430LEZ
434LEZ